How do I configure my pressure sensor?

How do I configure my pressure sensor?

  1. The pressure sensor contact is normally closed.
  2. Place the pressure sensor on the irrigation line.
  3. Remove the pressure sensor cap.
  4. Check that the value is 0 by selecting the “instantaneous value” function connected via Bluetooth on the app.
  5. Activate watering and verify that the value has changed to 1.
  6. To set it precisely, during watering, screw the pressure sensor until you reach the value of 0.
  7. Then, still during watering, gently unscrew the pressure sensor until you reach the value 1 again.
  8. Note that you can also use a multimeter instead of using the instantaneous value.